Claw Mole Trap (Pk 12)

Traps designed to catch and kill moles for the protection of lawns and gardens.

• Strong spring action for optimum success
• Manufactured from galvanised steel to prevent corrosion

Setting Trap

1. Slide the trigger plate into centre of trap in line with setting arm.
2. Squeeze the trap together so the claws are in open position. Pull the setting arm over and insert into hole in trigger plate.
3. Gently release pressure, letting setting arm take spring load. The trap is now set.

 How to use

1. Look for signs of mole activity such as fresh earth on mole hills. Do not place trap in a mole hill, but prod ground close by with stick to find a run. When the stick pushes through soil it will indicate a tunnel. Use a finger to see which way tunnel runs.
2. Place trap on top of ground in line with direction of tunnel. Mark out area around trap using a knife and remove turf and soil to expose tunnel.
3. Place set trap firmly into soil with trigger plate just above the bottom of tunnel.
4. Sprinkle a small amount of soil into tunnel and around the trap and trigger plate, then place the turf back over to block any light entering the tunnel.
5. Remember to mark location of traps.
6. Please check daily.